News

News
LC / FGS valves
Application:

-Shut-off valve in rolling mills, iron and steel works for service repairs
-Leakage-free sealing of control units for long pipes
-Low operation torque at working pressure
-Throttle valve

LC / FGS Valves

The 2-way valve is an hydraulic angle valve, designed as a cartridge type.
DN6 to DN32.

Function

The valve is operated manual by a hand wheel combined with a special force-transmission.
Operating torque is smaller than 5Nm, irrespective of load.
Therefore the outside diameter 70 for the hand wheel is required.

Advantage

A spring energised piston causes clearance-free movement and avoids peaks by operation at working pressure.
Rotation-free movement at the valve seat avoids defects at the sealing surfaces.
The 2-way cartridge valve can be used as an infinitely variable control valve from fully closed (leakage free) up to fully open position.

 

 


About us| Quality | Products | Inquiry | Contact | Exhibitions | How to find us | News | Download | Links | GTC

Besucher: 215559 online: 1
© Copyright 2003 by Pister Kugelhähne GmbH
Vogesenstrasse 37 - D-76457 Muggensturm | Telefon (0 72 22) 50 02-0 | Telefax (0 72 22) 50 02-50
Admin | LastUpdate: 06-Jul-2005 | designed by Medienagentur more traffic